VIDEO:
30 SECOND
PART BUILDER
EXPLAINED
- SMC Home
- Industrial Communication
- Sensors & Switches
- Auto Switch, Actuator Position Sensor w/IO-Link
Auto Switch, Actuator Position Sensor w/IO-Link
Actuator stroke position sensor is an analog output over the entire length of the stroke. The D-MP is available in 4 measurement ranges. Unit is IO-Link compatible.
- Measurement ranges: 25mm, 50mm, 100mm and 200mm
- Can be used with cylinder series MB, CQ2, MGP, CXSJ, CP96, C96 AND C55
- Compatible with IO-Link
- Analog output signal of 0 to 10 VDC and 4 to 20mA is selectable
- Signal output can be reversed
- Unit includes a teach pad for setting adjustments
- 3 lead wire options (free wire, M8-4pin and M12-4 pin)
How to order
Actuator Position Sensor
D-MP Series
Specifications
Model
D-MP025 D-MP050 D-MP100 D-MP200
Measuring range
25 mm±1 mm 50 mm±1 mm 100 mm±1 mm 200 mm±1 mm
Power supply voltage
15 to 30 VDC, Ripple (p-p) 10% or less (with power supply polarity protection)
Current consumption 48 mA or less (when no load is applied)
Repeatability
∗
1,
∗
2
0.1 mm (Ambient temperature: 25°C)
Resolution 0.05 mm
Linearity
∗
2
±0.3 mm (Ambient temperature: 25°C)
Switch output NPN or PNP 1 output (push-pull)
Maximum load current 40 mA
Internal voltage drop 2 V or less
Leakage current
NPN: 0.5 mA or less at load resistance 3 kΩ,
1.5 mA or less at load resistance 750 Ω
PNP: 0.1 mA or less
Short-circuit protection Yes
Analog current
output
∗
3
Output current 4 to 20 mA
Maximum load resistance
500 Ω
Analog voltage
output
∗
3
Output voltage 0 to 10 V
Minimum load resistance
2 kΩ
Lead wire PUR 4 cores ø2.6 0.08 mm
2
Standards CE marking (EMC directive/RoHS directive), UL
Impact resistance 300 m/s
2
Insulation resistance 50 MΩ or more (500 VDC measured via megohmmeter)
Withstand voltage 1000 VAC for 1 minute
Ambient temperature −10 to 60°C
Enclosure IEC60529 Standard IP67
IO-Link
Version V1.1
Communication speed
COM3 (230.4 kbps)
Process data size Input: 2 bytes, Output: 0 byte
Minimum cycle time
1 ms
Device ID 125 hex 126 hex 127 hex 128 hex
Vendor ID 83 hex
∗1 Repeatability of magnetic movement in one direction.
∗2 Varies depending on the operating conditions.
∗3 Switching between analog voltage/current can be set.
Weight
Model
D-MP025 D-MP050 D-MP100 D-MP200
Lead wire length
2 m (A) 29 31 37 51
0.3 m (B) 17 19 25 39
0.3 m (C) 25 27 33 47
[g]
How to Order
Measuring range
Symbol Specifications
025
25 mm
050
50 mm
100
100 mm
200
200 mm
Lead wire
Symbol Specifications
A
Separate line, 2.0 m
B
M8-4 pin, 0.3 m
C
M12-4 pin, 0.3 m
D MP 025 A
Lead Wire Specifications
Model
D-MP
Sheath Outside diameter [mm] ø2.6
Insulator
Number of cores 4 (Brown/Blue/Black/White)
Outside diameter [mm] ø0.57
Conductor Effective area [mm
2
] 0.08
Minimum bending radius [mm] (Reference values)
13
4
Related Products
Email Part
Email How to Order Page
Products
- Actuators
-
Directional Control Valves
- Directional Control Valves Overview
- Solenoid Valves - 4 & 5 Port
- Solenoid Valves - 3 Port
- Solenoid Valves - Direct Operated
- Industrial Communication
- Air Operated Valves
- Mechanical & Hand Operated Valves
- Safety Pressure Relief Valves
- Solenoid Valves - ISO
- Clean Room Products
- Valve Manifold Configurator
- Airline Equipment
- Air Dryers & Main Line Filters
- Connectors
- Vacuum Products
- Industrial Communication
- Sensors & Switches
- Fluid Process
- Static Control
- Electric Actuators
- Chillers
- Process Gas Equipment
- High Vacuum
- Chemical Handling Equipment
- Secondary Battery