VIDEO:
30 SECOND
PART BUILDER
EXPLAINED
IP200, Cylinder Positioner
Series IP200 cylinder positioner offers precise and stable position control of small bore cylinders. The IP200 can be used as a cylinder position control unit for process control, servomechanism and general industrial machines.
- Provides accurate and stable positioning of air cylinders
- Compact design
- Zero adjusting screw and feedback spring material available in steel or stainless steel
- Available in standard, low or high temp
How to order
Specifications (No load)
Note 1)
How to Order
Supply pressure 0.3 to 0.7 MPa
Input pressure 0.02 to 0.1 MPa
Applicable bore size ø50 or more
Applicable stroke 25 to 300 mm or less
Sensitivity
Note 2)
Within 0.5% F.S.
Linearity
Note 2)
Within ±2% F.S.
Hysteresis
Note 2)
Within 1% F.S.
Repeatability
Note 2)
Within ±1% F.S.
Air consumption
Note 3)
18 L/min (ANR) or less (SUP = 0.5 MPa)
Influence by change in supply pressure
Within 1% F.S./0.05 MPa
Ambient and fluid temperature
–5°C to 60°C
Port size Rc1/4 (Gauge port Rc1/8)
Weight Approx. 700 g (at 100 mm stroke)
Replacement Parts
Part no. Description Note
IP200-02 Pilot valve unit
39020-23 Seal kit
Ambient temperature: Standard (–5° to 60°)
¡ Servo-mechanism allows precise and stable position control of cylinders.
¡ Can be used as a cylinder position control unit for general industrial machines.
Construction/Principle of Operation
When signal pressure enters input chamber q, the input diaphragm e is deflected left. Clearance of the nozzle y is reduced causing higher back pressure at diaphragm A u.
This diaphragm A u has larger area than diaphragm B i resulting in movement of the spool to the left. Supply pressure then flows to OUT1 q and partial exhaust from OUT2
takes place resulting in cylinder rod t movement to the right. The movement is linked via connecting rod r and feedback spring w to the input diaphragm e balancing the
higher pressure. When this occurs nozzle y clearance increases allowing centralizing of the spool o to take place. This holds the piston rod in the new position. Input signal
increase results in proportional movement of the piston rod.
Cylinder Positioner
IP200 Series
Applicable stroke
25 to 300 mm
* Manufacture of strokes in 1 mm increments is possible.
100
IP200
tCylinder rod
rConnecting rod
yNozzle
eInput diaphragm
wFeedback spring
qInput chamber
uDiaphragm A
oSpool
iDiaphragm B
EX OUT2EX OUT1
SUP (SUP air) IN (SIG air)
Note 1) Specification values are given at normal temperature (20°C).
Note 2) Characteristics relating to accuracy differ depending on combination
with other constituent loop equipment, such as positioners and
actuators.
Note 3) Air consumption is due to exhaust from nozzle. And (ANR) indicates JIS
B0120 standard air.
152
Related Products
- Valves & Manifolds
- Fittings
- Cylinder Parts & Accessories
- Tubing
- Pressure & Vacuum Switches
- Airline Equipment
- 4/5 Valves PS
Valves & Manifolds More →
Cylinder Parts & Accessories More →
Pressure & Vacuum Switches More →
Airline Equipment More →
4/5 Valves PS More →
Email Part
Email How to Order Page
Products
- Actuators
-
Directional Control Valves
- Directional Control Valves Overview
- Solenoid Valves - 4 & 5 Port
- Solenoid Valves - 3 Port
- Solenoid Valves - Direct Operated
- Industrial Communication
- Air Operated Valves
- Mechanical & Hand Operated Valves
- Safety Pressure Relief Valves
- Solenoid Valves - ISO
- Clean Room Products
- Valve Manifold Configurator
- Airline Equipment
- Air Dryers & Main Line Filters
- Connectors
- Vacuum Products
- Industrial Communication
- Sensors & Switches
- Fluid Process
- Static Control
- Electric Actuators
- Chillers
- Process Gas Equipment
- High Vacuum
- Chemical Handling Equipment
- Secondary Battery